Vedat Senol
Vedat Senol, Ph.D.
Malmö, SE

Multidomain Modeling Expert

Vedat Senol, Ph.D.


I model how complex physical systems behave — and fail — whether the hardware exists yet or not.

Modeling & Simulation Control & Calibration Tools & Production

Get in touch LinkedIn


From multidomain physics to production systems

CTRL

Control Systems

Optimal and predictive control — LQR, MPC, state estimation — keeping systems stable and within limits under disturbance.

ENRG

Energy

Wind, battery, and thermal energy systems — pack-level state estimation, storage performance, and power flow under real duty cycles.

O&G

Oil & Gas

Electrical submersible pump modeling, plus mooring and riser mechanics and structural loads on floating platforms.

DYN

Dynamic Systems

Roll-to-roll web handling, rotating machinery, and multibody mechanics — predicting vibration, contact stress, and resonance.

MOD

Multidomain Modeling

Coupled structural, thermal, fluid, and electrical physics in one Modelica/FEM model — exported as FMUs for co-simulation and digital twins of existing hardware.

AGENT

Agentic Frameworks & Production

LLM agents wrapping simulation tools — plain-language prompts that run real models, plot results, and ship as deployable apps.


Selected technical writings

The MicroDuck biped mid-stride on a checkered floor
MicroDuck · Part 1

Why Rebuild a Walking Robot Duck in Modelica?

A flock of 25 cm MicroDuck robots walked out on stage with Jensen Huang at NVIDIA GTC. Pollen Robotics and Hugging Face released the MuJoCo training environment and neural network weights under…

Read post →
A converting line sketch fades to the note that a 0.23 degree idler yaw walks the web 2.23 mm sideways, then to the simulated film line
R2RDynamics · Part 2

Modeling a Moving Web with Roll2RollDynamics

Roll2RollDynamics is a Modelica library for roll-to-roll web handling. Spans stretch, rolls slip, nips load and winders change radius, all in one connected model that also tracks where the web runs…

Read post →
Fixed-base and isolated frames under two earthquake records
StructuralDynamics · Part 1

What Can Electrical Circuits Teach Us About Earthquake Engineering?

Why does the same building sway so differently under two earthquakes? In Figure 1, peak horizontal ground acceleration (PGA) is 0.42 g for Northridge 1994 and 0.51 g for Kobe 1995, where g is…

Read post →
Side-by-side operating loop: the NiceGUI web console on the left writes Modbus TCP command registers 40101 to 40104 and polls readings 40002 to 40014, while the Modelica StockholmPod.fmu diagram on the right highlights the active heat-pump, delivery, and tank-charging paths.
DC2DH · Part 2

Building a Digital Twin's Skeleton, End to End

Picture a data-center pod beside Stockholm's district-heating network. Its servers reject heat continuously. A heat pump can lift that heat to a useful temperature, while an accumulator can shift…

Read post →
Lake Mead seen from Hoover Dam, with a water intake tower on the Nevada side at left: a white mineral bathtub ring runs along the canyon walls above the waterline, marking the level the reservoir used to stand at
DC2DH · Part 1

Why Stockholm, Not Arizona: Where AI Waste Heat Has a Buyer

A bathtub ring: mineral left on rock the water used to cover. Lake Mead from Hoover Dam in 2005. The band has grown a great deal since. USGS, public domain. On August 8, 2026, Lake Mead, the Colorado…

Read post →
Winding line with a misaligned idler and nip roll, web coloured by tension
R2RDynamics · Part 1

More Grip, Better Tracking? Modeling the Tradeoffs

The slip reading improves. The web stays off centre. Has more nip force solved the problem? In this simulated film-winding line, increasing nip load cuts accumulated slip by 66%, while final lateral…

Read post →
Collective blade pitch, its commanded-pitch trace, and the mooring repositioning solve
FOWT · Part 4

Pitch Damping and Mooring Repositioning: The Same Kind of Control?

The FOWT model from our previous post could simulate platform motion, resolve the mooring loads, and report whether a run stayed within its limits. It could observe the system, but it could not…

Read post →
Plain-language request becoming two tool calls and a platform pitch trace
FOWT · Part 3

Who Runs Your Simulation When You're Not a Simulation Engineer?

tl;dr. Parts 1 and 2 of this series built a floating-wind mooring model and turned it into a dynamic co-simulation. By the end of Part 2 the simulator could already answer real engineering questions.…

Read post →
6DOF floating wind turbine platform in motion
FOWT · Part 2

It Moves Now: Dynamic Mooring with a 6DOF FOWT

A floating wind turbine that never moves isn't telling us very much. Part 1 of this series held the platform at a single frozen offset, a useful first look at the mooring physics, but no real…

Read post →
OC4 platform undergoing circular surge with catenary mooring lines
FOWT · Part 1

One Line. Four Models. Which One, and When?

Mooring lines bend, sag, drag along the seabed, and reshape with every platform motion. What force does that shape put on the platform right now? The answer drives early design, safety margins, and…

Read post →

See all writings →


Academic rigor, industrial application

Vedat Senol is a modeling expert — a mechanical and civil engineer with a Ph.D. As an independent consultant, he builds multidomain models and simulations of complex physical systems, predicting how they behave and fail before hardware is built, across control, energy, oil & gas, and dynamic systems.

His work couples structural, thermal, and control physics in a single multidomain model using Modelica and finite element methods — turning expensive, high-stakes design questions into simulations that answer them first.

6Domains Covered
4Team Members
4Published Write-ups

Get in Touch

Available for consulting engagements and research collaboration.

Send Email LinkedIn